Safeguard Solution Suite

Hazard Detection

See electrical threats before your workers do

Electrical energy is invisible—until contact. Safeguard's Solution Suite continuously monitors for AC voltage and current as well as arc-flash conditions, so crews get alerted the moment they approach danger—before a near-miss becomes an incident.

Request a DemoRead the Connected Safety Playbook
Downed power line in storm damaged area

You can't protect workers from hazards they can't see

Most serious electrical incidents don't happen because crews don't care—they happen because risk is hidden, mislabeled, or assumed to be safe.

In the field, "invisible" danger shows up as:

  • Underground utilitiesthat aren't marked, or aren't where the map says they are
  • De-energized lines that aren't(backfeed, induction, switching errors, incorrect tags)
  • Unmarked equipmentinside cabinets, vaults, pedestals, and enclosures
  • Temporary or unfamiliar work zoneswhere conditions change hour to hour

When workers can't see the hazard, they can't react in time. Safeguard's Solution Suite helps close that gap.

Real-time detection at the point of work

Safeguard's Solution Suite is built for the moment risk appears—when a crew steps toward a cabinet, opens an enclosure, approaches a line, or begins an excavation.

  • Detects AC voltageMonitors for electrical energy and triggers alerts based on your configured thresholds—supporting real-world environments in utilities, construction, telecom, and industrial work.
  • Configurable range and sensitivitySet sensitivity levels and approved configurations so workers get the right warning for the environment—without guessing.
  • Clear, immediate alertsVisual and audible warnings designed for noisy, high-distraction work zones—so the signal is obvious when seconds matter.

The goal isn't more alarms. It's earlier awareness and safer decisions.

Safeguard equipment in use
Electrical infrastructure

Coverage across the most common electrical threats

Safeguard's Solution Suite helps crews detect and respond to hazards encountered across overhead, underground, and equipment work.

  • Overhead linesIdentify danger as crews approach energized areas
  • Buried utilitiesAdd an extra layer of awareness during excavation and exposure
  • Energized equipmentReduce risk around cabinets, enclosures, vaults, and work zones
  • Arc-flash conditionsGet warnings when conditions indicate elevated arc-flash risk

More awareness before contact. Fewer surprises at the point of work.

Visibility that supports coaching, compliance, and continuous improvement

Safety doesn't stop at the device. When Compass Pro connects with Navigator, leaders gain real-time visibility and the context needed to strengthen field safety.

  • Real-Time Emergency ResponseSee active emergency alerts and field activity as it happens—so supervisors and safety leaders can respond faster and support teams more effectively.
  • Alert history and analyticsReview patterns over time to identify repeat hazards, high-risk locations, training opportunities, and workflow improvements.
  • Built to fit your operationNavigator helps teams align device activity with safety processes—so visibility turns into action, not just data.
Safety dashboard analytics
Our Solutions

Proactively manage risk from the office and in the field

Workers with Compass Pro devices detecting electrical hazards

Compass Series

Intelligent wearables that detect hazards and alert workers in real time

Detect hidden electrical hazards

Underground utilities that aren't marked, de-energized lines that aren't, and unmarked equipment inside cabinets and enclosures.

Click to learn more

The Compass Series uses advanced electromagnetic field sensing technology to detect energized conductors through walls, underground, and inside enclosures. Unlike traditional voltage detectors that require direct contact, our wearable sensors provide continuous proximity-based detection, alerting workers before they get dangerously close to hidden hazards. This passive detection requires no action from the worker—protection is automatic and always-on.

Real-time voltage monitoring

Safeguard's Solution Suite continuously monitors for AC voltage and current as well as arc-flash conditions.

Click to learn more

Our sensors detect AC voltage from 50V to 500kV across the full frequency spectrum used in utility and industrial applications. The system monitors for dangerous current levels and arc-flash precursors, providing graduated warnings as risk levels increase. All detection data is logged with GPS coordinates and timestamps, creating a comprehensive safety record for compliance and incident investigation.

Configurable alerts for your environment

Set sensitivity levels and approved configurations so workers get the right warning for their specific work zone.

Click to learn more

Every work environment is different. The Compass Series allows safety managers to configure detection thresholds, alert patterns, and approved work modes through the Navigator platform. Create profiles for different job types—from high-sensitivity settings for confined space work to adjusted thresholds for energized work permits. Changes sync instantly to devices in the field, ensuring workers always have the right protection for their current task.

Visual and audible warnings

Clear alerts designed for noisy, high-distraction work zones—so the signal is obvious when seconds matter.

Click to learn more

The Compass Series delivers multi-modal alerts through bright LED indicators visible in direct sunlight, audible alarms that cut through heavy equipment noise, and haptic vibration patterns felt even when wearing heavy gloves. Alert intensity escalates as hazard proximity increases, giving workers intuitive feedback about risk levels. The distinct alert patterns are easily learned and instantly recognized, ensuring immediate response when it matters most.

Learn More About Compass Series

Prevent incidents before they happen

Give crews earlier warning and give leaders the visibility to reinforce safer work—without slowing the job down.

Request a Demo

See how Compass Pro + Navigator helps your team detect hazards earlier, prevent accidents, and respond faster.

Hazard detection resources

White Paper

Compass Pro Financial Benefits

Read
White Paper

Compass Pro Use Cases

Read
White Paper

Leveraging SOS Technology

Read
See all Whitepapers

SET UP A DEMO

Contact our sales team to request an in-depth demonstration of our products and services. We'll show you how they work, and answer any questions you may have.

JOIN OUR PILOT PROGRAM

Receive units to try on your own home turf. Our team will provide in-person training and an in-depth walkthrough of use-case scenarios.

IMPLEMENT PRODUCT

All Safeguard products are designed, made, and quality-tested in the USA. When you're ready, we'll fulfill your order based on your quantity needs.

Contact Us